Description
The No.1 easy to use, safe, high performance waterproofer for wet weather clothing and equipment.
Adds Durable Water Repellency (DWR) and revives breathability – in a washing machine.
Breathable waterproof garments are most likely to get sweaty and wet inside when used in damp or wet conditions. If the outer fabric absorbs water, the garment can lose up to 70% of its breathability. Therefore, the DWR on the outer fabric of your jacket must be maintained to ensure comfort. It will eventually wear off and need to be renewed with Nikwax TX.Direct.
When we work hard, we sweat. The evaporation of sweat cools us down and keeps us comfortable. But, when it rains we want to avoid getting wet, so we put on waterproof outerwear to keep us dry.
The waterproof fabric must allow moisture vapour to pass through it, or ‘breathe’; otherwise our sweat cannot evaporate, causing us to overheat and get wet from condensation. Additionally, if the outer fabric of your garment absorbs water and ‘wets out’ its breathability will be reduced, causing you to feel clammy and wet.
Nikwax TX.Direct adds DWR, which prevents water absorption, whilst maintaining breathability, keeping you dry and comfortable.
Your raingear could be soaking up water just because it is dirty. First, try cleaning it with Nikwax Tech Wash, and if it is fairly new, or recently re-waterproofed, the DWR will be revitalised just from cleaning. But, once the garment has been thoroughly worn, you will need to add DWR, using Nikwax TX.Direct, after cleaning first with Nikwax Tech Wash.
Alternative waterproofing products are often solvent-based aerosols; alternatively, they may be water-based and use fluorocarbons. Aerosol products are flammable. Fluorocarbons pose a potential risk to the environment and to the long-term health of the consumer.
Nikwax TX.Direct is a safe product to use on breathable waterproof fabrics. It is WaterBased, non-flammable, contains no volatile organic compounds (VOCs) and is fluorocarbon free. Nikwax TX.Direct has been specifically designed and optimised for breathable waterproof clothing, providing DWR whilst maintaining breathability. Nikwax TX.Direct requires no heat to develop its DWR, so it is not necessary to use a tumble drier for best results. As garments with taped seams get older the tape adhesion weakens, becoming more fragile and susceptible to heat, so it is best to avoid tumble drying.
Using the right cleaning product is as important as using the right waterproofing product. Conventional detergents leave behind a thin water-absorbent film on materials, which masks their DWR. Therefore, always clean your waterproof garments with Nikwax Tech Wash. Remember that dirt itself works against DWR, so regular cleaning will enhance performance.
Volume: 300ml or 1 Litre
