The Litetrek Pro III is a 3-person, double wall tent, designed for lightweight trekking in alpine terrain, where protection against severe weather, wind stability, light weight and compact pack size are key. Its three-season spec is optimised for use during the milder months of the year. Wind-tunnel tested for stability at 90km/h by the Technical University of Munich.

Its robust, reliable semi-geodesic, double wall construction enables full use of space and ensures an optimal balance of weather protection and ventilation. The 100% self-supporting design means that you can pitch without problem on rocky terrain, or at alpine sites where there is not enough space to set up with guy lines and pegs. Alternatively, the anchor points can be extended for more flexibility, for example on snowy terrain. Its tear-resistant 20D ripstop nylon flysheet is silicone- and PU-coated to give it a 3,000mm water column, the floor is made of robust PU-coated 40D ripstop nylon that gives a 10,000mm water column, while the 66D ripstop polyester inner tent has a mesh and mosquito net entrance. Ventilation is regulated via a rear panel with zippers (which can be operated from both inside and outside) allowing you to adjust the fresh air supply and prevent humidity.

In addition, our 3S Speed Set Up Solution with short, flat sleeves and hooks allows you to set up fast and effectively in one pitch. And in good weather or on fine nights, you can go minimalist and pitch the flysheet on its own. What really sets the Litetrek Pro III apart is its versatility – check out the weatherproof vestibule for gear storage and cooking, which is integrated into the inner tent, or can be extended as required.

  • Footprint available
  • Repair set
  • Door storage pockets
  • Different door opening options
  • Zipper with anti-catch flap
  • Nylon hooks for fixing the fly even in cold conditions
  • Extendable and replaceable anchor points
  • Cord locks
  • Extended guy line webbing
  • Reinforced Hypalon sleeve finishing
  • Vestibule extension solution
  • 100% Self supporting construction


  • Three-Season rating
  • Entrances: 1
  • Persons: 3 Persons
  • Ventilations: 1
  • Ventilation type: Ventilation panel with zippers
  • Vestibule for gear storage and cooking: Yes
  • Vestibules: 1
  • Guy lines quantity: 4
  • Pegs quantity: 10
  • Pole diameter: 8.5mm
  • Pole quantity: 3
  • Poles: 7001 T6 ultralight Aluminium
  • Tent construction: Semi geodesic double wall
  • Watercolumn Floor: 10000mm
  • Watercolumn Fly: 3000mm
  • Wind Protection: Minimum 90km/h windspeed approved in the windchannel of Technical University of Munich


  • Inner Floor Area: 3.47m²
  • Inner Dimensions: 165cm wide x 210cm long x 107cm tall
  • Vestibule Size: 0.74m²
  • Packed Dimensions: 40cm x 19cm

Weight: 2.42kg (minimum weight: 2.1kg)